Patet plastic corona

Patet Plastic CUMATIUM@___@Connexiones plus quam XX annos experientiam in infusione fingendi industriam habet. Cum valido consilio machinarum machinarum turmas et machinis provectis, morem plasticum iniectio fingens praebere possumus ut omnibus tuis postulatis occurram. Serena corona plastica una e nostris praecipuis productum est.

Plasticae Molding

Ut una e pompa processionali iniectio plasticae societatis, nos varietatem iniectionis partium per tuam petitionem facere possumus, iniectionem plasticam effictam manifestam dicere. Our one- stop OEM/ODM officia modo inchoari a tua captura idea seu conceptu.

Morem nostrum Serenum Plastic CUMATIUM officia includunt

3D Molde Design

• Mold Processing
• 
• Mold Trial and Inspection
• 
• Patet Plastic Molding
• 
• Plasticae Partes Plasticae finitis
• 
• PCB SMT
• 
• Product Conventus ac Reprehendo
• 
• Product Packing
• 
• Final Inspection
• 
• Delivery
• 
• Product Specifications for

Clarum Plastic Molding@__ S136 P20H LKM@Cavity Material

Plasticarum partium Cingurae

FAQA： Nos in Sinis directus fabricare plus quam XX annos experientiae in plastic injectione fingens industriam.Q1: Estisne fabricare vel mercaturam facere?

Q2: 3D nihil habeo, quomodo novum inceptum incipiam?Q3. Quae est forma solutionis? A: Morem solutionis prohibere possumus ac facile est incipere. Modo potes nobis mittere specimen quoddam effictum et adiuvabimus te ad perficiendum 3D trahentem consilium et sequentes rationes per necessitates tuas.

A: L% Finge depositum sumptum, custum libratum sumptus et 50 productionem gratuita solvenda cum specimen confirmatur. Et libra productio sumptus contra exemplum B/L.

Q4 solvitur: Quae sunt cardinis puncta ad faciendum summa qualitas

?

forma plastica clarum

A: Ob summam lucem transmissionis. iniectio pellucidae coronae plasticae, qualitates necessariae productorum plasticorum altissimarum, et quaelibet foramina, notati et albescentes non licet. Praeparatio igitur materiarum rudium, armorum et instrumentorum requisita, iniectio corona processuum et materiarum pertractatio productorum stricte perficienda est.

Q5: Quomodo bene declarare formas plasticas facere?

A: Quaestiones notandae sunt in forma consilio (including product design). Inaequale refrigeratio pauperes fingens plasticum, defectiones superficiei et corruptionis causabit, sequentia puncta observanda sunt cum formas designantes:

a) Paries crassitudo uniformis esse debet et cortices clivum satis magnum esse debet.

b. ) Ostiae. Cursor satis late et satis crassus sit, portae positio secundum DECREMENTUM processum ponenda est, et materia frigida, si opus sit, apponatur.c) Pars transitus sensim debet esse. Lenis transitus ad angulum ne quis acutis. Praesertim in PC productis, hiatus non debet esse.

d) Formae superficies lenis asperitate (potius minus quam 0.8);

e) Vents esse debet. Canistae sufficientes cavebunt liquefactionem et aerium vapores arcendi.

f) Praeter PET, parietis crassitudo nimis tenuis non debet esse, plerumque non minus quam 1mm.

Q2: I have no 3D drawing, how should I start the new project?

A: We can provide custom one-stop solution and it is easy to start. You can just send us a molded sample and we will help you to finish the 3D drawing design and following procedures per your needs.

Q3. What is your terms of payment?

A: 50% Mold cost deposit, the balanced mold cost and 50% production cost to be paid when sample is confirmed. And the balanced production cost is paid against copy of B/L.

Q4: What are the key points for making high-quality clear plastic molding?

A: Due to the high light transmittance of transparent plastic injection molding, the quality requirements of plastic products are very high, and any holes, marking and whitening are not allowed. Therefore, the preparation of raw materials, equipment and tooling requirements, injection molding process and material handling of products should be strictly implemented.

Q5: How to make a good clear plastic molds?

A: Issues should be noted in the mold design (including product design). Uneven cooling will cause poor plastic molding, surface defects and deterioration, so the following points should be paid attention to when designing molds:

a) The wall thickness should be uniform and the peel gradient should be large enough.

b) Doors. The runner should be wide enough and thick enough, the gate position should be set according to the shrinkage process, and cold material should be added if necessary.

c) Part of the transition should be gradual. Smooth transitions to prevent any sharp corners. Especially for PC products, there must be no gaps.

d) The surface of the mold should be smooth with low roughness (preferably less than 0.8);

e) Vents. Sufficient canisters will ensure venting of melt and airborne gases.

f) Except for PET, the wall thickness should not be too thin, generally not less than 1mm.